PneuMoment™ Pneumatic Actuator

With eight PTFE impregnated bearing pads and a hard coat anodized load beam, the PneuMoment™ pneumatic actuator is capable of moving loads up to 700 lbs. and moments up to 7000 in-lbs. (Application and bore size dependent). No lubrication is needed for the bearings, although standard air line lubrication should be used to enhance the actuator’s seal life.

  • Bore sizes for the PneuMoment™ pneumatic actuator:  1-1/16”, 1-1/2”, 2”, 2-1/2”
  • Standard stroke lengths:  1” to 15” (Custom stroke lengths available to 30”)
  • Maximum operating pressure:  150 psi
  • Auxiliary ports transmit air or vacuum through the actuator to operate automation devices
  • Available in U.S. customary units (inch) or metric
  • Built-in track for position sensing switches
Units of Measurement:Inch
Stroke Length (inch):1 ... 15 "


Warning: Cancer and Reproductive Harm -