Mid Series Venturi Vacuum Pump - VP10

The VP10 Mid Series air-powered venturi vacuum pumps are highly efficient, capable of reaching 28”Hg [948mbar], dirt tolerant, and include a silencer for quiet operation. Lightweight and compact, they can be easily mounted close to the vacuum point for fast response. All Mid Series pumps incorporate Bimba’s interchangeable venturi cartridge system that allows a choice of 11 different cartridge assemblies to optimize pump performance to meet specific application needs.

  • Safe operation – high flow, strong holding force
  • High productivity – powerful vacuum up to 28”Hg [948mbar]
  • Compact & lightweight – modular design speeds installation
  • Efficient – minimal air consumption Reliable – operates trouble-free:
  • Straight-through, no moving parts design, non-clogging
  • No maintenance, no downtime

VP10 Pump Standard Specifications:
Pump Material: Anodized Aluminum (For silencer material, see the Accessories Section
Cartridge Material: Nylon, Buna-N O-ring (Other materials available - See page 19-21)
Medium: Filtered (50 Micron) unlubricated, non-corrosive dry gasses
Operating Temperature: -30° to ~250° F [-34° to ~121°C]
Operating Pressure: 80 PSI [5.5 bar] Standard or 60 PSI [4.1 bar] – Consult Factory for other operating pressures

VP10 Operating and Installation Requirements:
Cartridge size: C60 (M, H) and C90 (L, M, H) C100 (L, M, H) and C150 (L, M, H)
Supply Line: 1/4” O.D. [6mm] tube recommended 3/8” O.D. [10mm] tube recommended
Vacuum Line: 1/4” O.D. [6mm] tube recommended 3/8” O.D. [10mm] tube recommended
Vacuum Line Filtration: Typically vacuum filters are not required. If desired, Bimba recommends – VF125LPM. See the Accessories Section.
Control Valve: 3 way/2 position (faster part release), minimum orifice – 0.125 ID [3mm]
Mounting Holes: Mounting holes accept 4-40 [M3] screws


Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov