Mid Series Venturi Vacuum Pump - VP20

Bimba's Mid Series vacuum pumps provide maximum design versatility: designers specify only the features necessary for their specific application. VP20 models offer multiple options for an integrated valve. Bimba’s interchangeable venturi cartridge system enhances manufacturing flexibility, enabling designers to choose the vacuum level, vacuum flow, evacuation speed and air consumption based on any one of 11 venturi cartridges.

  • Customize your pump performance with interchangeable venturi cartridges
  • Safe operation – high flow, overcomes leakage providing a strong holding force
  • High productivity – powerful vacuum up to 28”Hg [948mbar]
  • Fast response – installs close to vacuum point
  • Efficient – minimal air consumption
  • Reliable – operates trouble-free, straight-through design, non-clogging

VP20 Pump Standard Specifications:
Pump Material: Anodized Aluminum (For silencer material, see the Accessories Section)
Cartridge Material: Nylon, Buna-N O-ring (Other materials available, See pages 19-21)
Medium: Filtered (50 Micron) unlubricated, non-corrosive dry gases
Operating Temperature: -30° to ~250° F [-34° to ~121°C]
Operating Pressure: 80 PSI [5.5 bar] standard or 60 PSI [4.1 bar] – Consult Factory for other operating pressures

VP20 Operating and Installation Requirements:
Cartridge size: C60 (M, H) and C90 (L, M, H) C100 (L, M, H) and C150 (L, M, H)
Supply Line: 1/4” O.D. [6mm] tube recommended 3/8” O.D. [10mm] tube recommended
Vacuum Line: 1/4” O.D. [6mm] tube recommended 3/8” O.D. [10mm] tube recommended
Vacuum Line Filtration: Typically vacuum filters are not required. If desired, Bimba recommends – VF250LPM. See the Accessories Section.
Control Valve: 3 way/2 position (faster part release), minimum orifice – 0.125 ID [3mm]
Mounting Holes: Mounting holes accept 10-32 [M5] screws


Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov